Navigation: Home > Products
SIEMENS
MODEL FUNCTION CLICK
SB CM01+ Siemens S7-200 Smart PLC adopts isolated RS485/232 interface board to isolate the RS485 and RS232 signals, so as to effectively solve the grounding interference and burning interface problems of RS485/232 nodes due to different ground potential. It’s equipped with lightning protection and anti-interference equipments and built-in RS485 terminal resistance (switch to enable) with the maximum communication distance of 1000m. Also, it’s fully compatible with Siemens non-isolated interface board SB CM01 which can be replaced directly for convenient use.
Detail...
CP5512E ExpressCard CP5512,it’s suitable for Laptop Expresscard slot,is used to achieve PROFIBUS/MPI/PPI/FWLcommunication between PC and SIMATIC Net. Communication speed is 9.6Kbps--12Mbps.It can be also used for desktop computer after the conversion card.
Detail...
USB Adapter CN support USB to PROFIBUS/MPI/PPI communication,compatible with Siemens original PC Adapter USB ,isolated and the largest speed is 1.5Mbps.USB port supply the power. Besides it can be used for S7-200/300/400 PLC,support long distance communication,allowed cable length meet the profibus standard.
Detail...
PC Adapter CN This adapter is compatible with Siemens PC Adapter and HMI adapter,fully support RS232 port of PC and HMI to PROFIBUS/MPI communication, use the Siemens special protocol processing chip,it can be used for Siemens S7-300/400 series PLC and other equipments with PROFIBUS/MPI interface. RS232-RS485-power supply are all optical isolated, especially suitable for the strong interference and communication interface easily damaged industrial scene.
Detail...
FS-BT-PPI Siemens S7-200PLC the Bluetooth communication suite, use Bluetooth wireless communication substitute traditional PC/PPI 、 USB/PPI programming cable, support RF PPI and RS485 free mouth communication, Bluetooth communication distance 300metres (broaden), the baud rate of 2.4Kbps ~ 115.2Kbps , for industrial design strong.
Detail...
FS-BT-MPI Siemens S7-300/400PLC the Bluetooth communication suite, use Bluetooth wireless communication substitute traditional PC/MPI 、 USB/MPI programming cable, support for PC or touch screen and PLC MPI estuary wireless communication, Bluetooth communication distance 300metres (broaden), serial baud rate 19.2Kbps ~ 115.2Kbps can be set, MPI estuary baud rate 187.5Kbps or 19.2Kbps automatically adapt to, for industrial design strong.
Detail...
CP5512 Notebook computer with SIMATIC NET communication card, the corresponding Siemens 6GK1551-2AA00, optical isolation, anti-lightning surge for notebook PCMCIA 32bit CardBus slot for the realization of PC and network SIMATIC between PROFIBUS / MPI / PPI / FWL Communications connectivity, communications rate 9.6Kbps ~ 12Mbps. After the conversion by the card adapter can also be used for desktop computers and second-generation ExpressCard slot of the notebook computer.
Detail...
USB/PPI USB interface Siemens S7-200PLC and TP170 touch-screen programming cable, USB / PPI interface, 3m, with communication indicator, to replace Siemens products: 6 ES7 901-3DB30-0XA0, the greatest distance is 2km.
Detail...
USB/PPI+ Siemens S7-200PLC and TP170 touch-screen programming cable with isolated USB interface, USB / PPI isolation,3m, with communication indicator, to replace Siemens products: 6 ES7 901-3DB30-0XA0, the greatest distance of 2km.
Detail...
USB/PPIM+ Siemens S7-200PLC and S7-200Smart multi-station owners PPI programming cable with isolated USB interface, directly use the USB interface of STEP7 MicroWIN and STEP7 Micro WIN Smart software , without having to install drivers, support the PPI, multi-station owners PPI and senior PPI agreement. Support the 187.5 Kbps high-speed communications, 100 percent same with Siemens 6 ES7 901-3DB30-0XA0, 3m, with Communication indicator.
Detail...
PC/PPI RS232 interfaces Siemens S7-200PLC and TP170 touch-screen programming cable, three meters. RS232/PPI interface, to replace Siemens products: 6 ES7 901-3CB30-0XA0, do not support the long-distance communications.
Detail...
PC/PPI+ light Isolated PC / PPI cable, with the same function as PC/PPI, support 10 and 11 MODEM communication, with Communication indicator , baud rate 0 ~ 115.2 Kbps and automatic adaptive, the largest communications range is 2km.
Detail...
PC/MPI+ Siemens S7-300/400PLC Programming adapters cable with isolated RS232 interfaces, RS232/MPI isolation, with communication indicator, to replace Siemens products: 6 ES7 972-0CA23-0XA0, The communications rate of PC port is 19.2Kbps~115.2Kbps and can be automatically adapted, the communications rate of MPI port is 187.5Kbps and 19.2 Kbps and can be automatically adapted too. Can use PC / MPI + to connect PLC and the touch-screen of third-party manufacturers for communications.
Detail...
LOGO! USB-CABLE Siemens LOGO! Controller programming cable with isolated USB interface,2.5m.
Detail...
LOGO! PC-CABLE Siemens LOGO! Controller programming cable with isolated RS232 interfaces, 3m, to replace Siemens products: 6 ED1 057-1AA00-0BA0, with the same appearance as Siemens products.
Detail...
MPI cable connective cable for S7-200/300PLC to Siemens touch screen, 5 m, the corresponding Siemens products: 6 ES7 901-0BF00-0AA0.
Detail...
RS232 cable RS232 cable for PC / MPI adapter, 5 m, the corresponding Siemens products,: 6 ES7901-1BF00-0XA0.
Detail...
OP Cable Siemens OP programming cable, 3 m, the corresponding Siemens products,: 6 XV1 440-2KH32.
Detail...
PC/TTY Communication interface cables for RS232 to Siemens S5 series PLC interface(DB15), 3m, the corresponding Siemens products: 6 ES5 734-1BD20, RS232 / current central interface.
Detail...
All:19  1/1Page  Talal 20 records Goto