Navigation: Home > Products
RS232/RS485/RS422 to Ethernet Converter
MODEL FUNCTION CLICK
FS-MDB485WG Industrial MODBUS TCP to RTU/ASCII gateway. It is for bi-directional protocol conversion from MODBUS TCP to MODBUS RTU/ASCII, easy to realize seamless connection between MODBUS Ethernet equipment and MODBUS serial port equipment . Serial port rate 1200bps~115200bps, serial port and power supply are isolated from each other, 9~40VDC wide voltage power supply, -20℃~+75℃ working temperature, DIN35mm standard guide rail installation.
Detail...
ISO-IE1K Industrial Ethernet Isolation Protector, used for electrical isolation of Ethernet port for various equipments, to eliminate interference caused by earth potential difference of two communication ends, with anti-lightning and surge protection. Support all communication protocols, such as Ethernet, real-time Ethernet, EtherNet/IP, EtherCAT, PROFINET, and Modbus. Communication speed: 1000/100/10Mbps, self-adaption, no need of external power supply, isolation voltage: 5000Vrms, working temperature: -40℃ ~ +85℃, installed with DIN35mm standard rails.
Detail...
IESW-8 Industrial-grade wide temperature range 8-port non-web administrator industrial Ethernet switch complies with the industrial Ethernet standards of IEEE802.3 and 10/100Base-TX with the Internet access speed of 10/100M and self-adaption. It has the broadcast storm suppression function with the power supply and Ethernet port status indicators. Internet access and the power port are isolated. Adopting the industrial-grade standard design, DIN35mm standard rail installation or bolt installation can be used with -40~+85℃ industrial-grade wide temperature range. It can be widely used in PLC, HMI, VVVF, DCS and other industrial control equipments based on the industrial Ethernet.
Detail...
ULink300 Industrial grade USB server is used to connect the USB equipment to the Ethernet, then you can access and share the USB equipment via the LAN or the Internet anytime anywhere. Therefore, the USB equipment will no longer be restricted by distance and location. It’s convenient to use, just like connecting the USB equipment directly to the computer. Self-adaptive 10/100/1000M Ethernet supports high-speed, full-speed and low-speed USB equipments. It’s specially designed for industrial control and supporting various PLC like Mitsubishi, Panasonic, Delta, Siemens, Omron and Schneider and other industrial control equipments and other equipments with USB interfaces.
Detail...
FS-ETH485A RS232/RS485/RS422 to Ethernet converter,support TCP Server、TCP Client、UDP Uni_Cast、UDP Multi_Cast mode, support Dynamic DNS, No need to revise the communication protocol and software, The RJ45 port,RS485 interface and power supply port are all isolated in order to suit harsh environment in the industrial scene.
Detail...
All:5  1/1Page  Talal 20 records Goto